How to get a Grawmet 2 kit.

Hi WOOFers,

The time has finally arrived for us to assemble a club order for Grawmet 2 kits! I know many of you are chomping at the bit to get one. Here's what you need to know:

> The kit cost is $325.

> The money is due by 5:30 pm on Friday. We start writing the orders on the weekend so if you miss the deadline then we can't order a kit for you this time. You'll have to wait until Autumn quarter at the earliest.

> The preferred tender is check. Checks must be made out to Washington Open Object Fabricators. If you don't have checks then we can take cash, but we'll need to have an extra witness to sign off that the transaction did take place.

> The only person who can accept payment is Mark Hanson (the treasurer). He will be in the WOOF room all week. The times are as follows:

TUE:   9:30 - 1:30

WED:   9:30 - 11:30, 12:30 - 3:30

THU:   10:30 - 12:30

FRI:   9:30 - 11:30, 12:30 - 3:00, 5:00 - 5:30

> We anticipate a lead time of 2-3 weeks.

This time around we aim to have a quicker completion rate than we experienced with the Grawmet 1. We're excited to get more club printers to our membership to spread the good work of 3DP. Keep being awesome!

-Mark Hanson

WOOF's a Hit at Engineering Discovery Days

I want to start off by thanking all of our volunteers for helping out Friday and Saturday.  You guys did a fantastic job and we had many a child leave that room with 3D printing sparkling in their eyes.

Thank you
Bethany







WOOF saw several hundred children and their parents come through the workroom over the course of the two days.  We got to show off some of the printers that our member's built, a frostruder that prints in playdough, and Big Red setup as a poster plotter.

Some pictures from the event:

This Friday (April 26)

Hey WOOFers,

This Friday is Engineering Discovery Days.  As WOOF will be participating, there will be no open workshop that day.  You are more than welcome to come by, hang out, and/or help out.

Volunteering:
I will be taking the first 10 people who sign up for time slots on the Doodle poll:
http://www.doodle.com/vteu4z467f9zv9fn
as official volunteers for Discovery Days.  Official volunteers get a t-shirt and pizza - so sign up soon!

Beth

Engineering Discovery Days Volunteers Needed!

Hey Fabbers,

WOOF is participating in this year's UW Engineering Discovery Days and need volunteers to help out.

Discovery Days is April 26 & 27 and we will need at least three volunteers every hour:
Friday April 26:
     Setup: 8:30 - 9:00
     Event starts: 9:00 - 2:00
     Clean-up: 2:00 - 2:30
Saturday April 27:
     Setup: 9:30 - 10:00
     Event starts: 10:00 - 2:00
     Clean-up: 2:00 - 2:30
http://www.engr.washington.edu/alumcomm/openhouse.html

I have created a Doodle poll with each hour option.  Please sign up for times that you will be helping out.  No need for any prior 3D knowledge, we are happy to teach you everything you need.  I have limited the number of people that can sign up for each hour to three obviously the more the merrier, so if a slot is full just show up.  We MUST have three volunteers every hour.
http://www.doodle.com/vteu4z467f9zv9fn

After you have signed up, please send me an e-mail with your name and the time you signed up (so that I know who to hunt down if you don't show up)
washuu-at-uw.edu

All the little kiddies thank you!
Bethany Weeks

Today's Open Workroom

Just a quick reminder to all that the WOOF room is open from 12:30 to 5:30 today to work on the Grawmet builds. As a special bonus there will be pizza there at 12:30. Come on in, grab some food, talk about projects, and get some work done on your Grawmet!

And we're back!

Spring quarter is starting up, and WOOF is jumping right in! Expect a General Project Discussion this Monday from 4:30 to 5:30, and a General Workday from noon to five this Friday. Both of these will be in the WOOF workroom (MEB 252).

Also, be checking your email! Our monthly email should be heading out soon, and will update you on what we have in store this month!

WOOF is winding down for the quarter...

Hey all you WOOFers,

We're coming up on finals week, and that means that WOOF is going to slowing down a bit. As such, there will be NO General Project Discussion or General Workdays this Monday or Friday.

So start cramming! WOOF will be back when Spring quarter starts up.

See you all then

General Project Discussion, now in the workroom!

Hey all you WOOFers!

Our General Project Discussion is happening March 4th (Monday) from 4:30 to 5:30. Since we've finally got our workroom back, we're going to use it!

Meet in the WOOF room (MEB 252) tomorrow, March 4th to discuss some projects!

Tomorrow we'll have a focus on administrative things. Budgets, progress reports, and the like. If you are or are interested in being a project lead, you should really try to attend this discussion.

Once the budgets are sorted out, the ball can get rolling on some of these projects!

Build Days are Back

Hi WOOFers,

Just a quick reminder that our room is now available to us again and therefore we will resume open workshop on Fridays from noon-5pm.

This week there will be pizza and soda at noon. Come on by to eat, work on your Grawmet, talk about 3D printing, learn from each other, get the ball rolling on group projects, and any other 3DP related stuff you want to do.

We hope to see you on Friday!

-Mark Hanson

WOOF's Second General Project Discussion

Hey you WOOFers!

Our second General Project Discussion is happening tomorrow, February 25th, from 4:30 to 5:30. It will be held in MEB 242 (NOT our normal workroom). Hope to see you there!

These discussion will be a weekly thing hopefully, so if you can't make it this week, just come the next!

General Project Discussion

Just a quick reminder, there will be WOOF's first ever General Project Discussion in MEB 242 (Not out normal workroom!) tomorrow, February 19th.

We're starting at 4:30, so feel free to stop by and see what's up! We'll be introducing some club wide projects for people to work on. These are projects that will be funded by WOOF, so it's a great opportunity for anyone who is new to 3D printing, and doesn't want to purchase a Grawmet kit just yet. Some projects that we're considering are designing the milk jug derby boat, and building a 3D scanner.

Come on down, have some snacks, and join in the discussion!

See you there!

Tutorials and This Friday

The Grawmet Builds will continue in the old WOOF office in the basement of Loew. We will be passing our emails out before the WOOF dinner, so individuals can make appointments. All appointments will be posted on the blog, so feel free to swing by Loew if you want to listen in. These are one-on-one tutorials, where you can schedule an appointment with either Mark Hanson or Brandon Bowman, for assembly, troubleshooting, flashing firmware, etc. Come in, let us know where you are at, and we will help you make some progress.

We will be handing out our emails to those who want to schedule an appointment. 

Bowman is available anytime Monday-Thursday excluding  MW2:30-3:30pm

Hanson is available: M after 2:30, T 10:30-2:30, W 12:30-1:30, 2:30-4:00, Th until 4:00, and F 10:30-5.

WOOF Dinner, Friday, Meet 5:00 pm - 5:30 pm (MEB 252) 

Discussion Topic: 3D printing the next milk jug boat.

RSVP in the comment section.

Matt Johnson has volunteered to take on designing and printing the WOOF boat for this year's Seafair Milk Carton Regatta.

For those of you who are unfamiliar with the Milk Carton Derby (or want more information) check out this link:

http://www.seafair.com/AnEvent.aspx?ID=3&SecID=890

Saturday July 13, 2013

Location: Green Lake

Time: 10:00 am - 4:00 pm

The rules are in the image below. Anyone who wants in on this project, be prepared to do some dumpster diving, milk jug de-labeling, work with shredding equipment and have some long nights printing some big parts. If you are in be prepared to work hard, and learn a bunch of really cool thinks. Thanks again to Matt Johnson for heading up this project.

See you on Friday!

-Brandon Bowman and Mark Hanson

Fridays collaborations

Since the room will not be available for Build Days the next few weeks we are planning on a group dinner for the next three Fridays. All WOOFers are welcome the idea is to gather around and talk about ideas and collaboration. WOOF has several projects coming up. 

Making a 3D scanner.
The 2nd Grawmet revision.
Design the boat for Seafair.

So bring your ideas to the table and we can talk about the list above, or anything else that gets suggested.

Dinner meet at the WOOF room 
(MEB 252) Friday 5:00-5:30pm
We will decide on a venue between 5:00 and 5:30pm
 Splitting up big checks with cards is tough, so consider bringing $10-15 cash because

You can RSVP by leaving a comment.
~Brandon B.

Notice of Room Use

The ME department has been very kind to allow us to use ME 252 as our home base. This term, the ME 356 class will need to use the room for approximately 3 weeks for a class project. In order to help make the room work well for ME 356, we are asking all WOOF members to remove their personal belongings from the room. This means printers, parts, tools etc. The more stuff we can temporarily remove,  the easier it will be for ME 356. Let's make it as convenient for them as possible so that we are welcomed back. Any items that are not removed will be temporarily hidden in Big Red or stored along the window sill.  This all needs happen by this Thursday. Sorry for the short notice. If you'd like to pick up something and need to be let into the room send an email to any of the officers or email woof3d@uw.edu.

During the next few weeks, plan on having very limited access, if any, to the WOOF room.

Please spread the word. This needs to happen this week.

Thanks,

Matt

ME 495 Capstone w/ WOOF

Hey WOOF graduating seniors,

I am trying to get a feel for WOOF members who are planning to/would like to still do a capstone with a WOOF project next quarter.  Prof. Ganter right now is really interested in doing a Stonespray attachment to the large printer that is being build this quarter: http://www.stonespray.com/

Send me an e-mail if you would like to do this as your capstone: washuu-at-uw.edu
Bethany

First Grawmet Print!

That's right! The Grawmet kits are finally getting to the point of printing!

WOOF member Bing had the following to say about his Grawmet:

Here it is! My first somewhat successful print with the Grawmet - a BOX! Since the thing isn't calibrated correctly the box is very squished along the Z-axis.

Way to go, Bing!

The first working Grawmet!

Scholarship Opportunity

Dear University of Washington STEM Students,

The Astronaut Scholarship Foundation (ASF) is offering a competitive $10,000 scholarship for University of Washington students who are in Science, Technology, Engineering, or Math (STEM) disciplines. Awardees will receive funding for their 2013-2014 academic year.

All motivated STEM students, who have demonstrated success in both their course work and research projects, are encouraged to apply. Space Grant must receive all materials by 5pm on March 1, 2013. Furthermore, Space Grant will notify applicants of their application status by March 5, 2013.

Student Eligibility and Application process:

-Must be a United States citizen

-Application must include a letter of reference and cover sheet completed by at least one faculty member who has worked closely with you

-Must hold either junior or senior status at the beginning of the

2013-2014 academic year

Nomination documents and details may be downloaded from:

http://www.waspacegrant.org/for_students/undergraduate_programs/scholarships/

 

All application materials must be sent to the Space Grant main office at:

WA NASA Space Grant

Attn: Astronaut Scholarship Foundation

Johnson 141

Box 351310

Seattle, WA 98195

As general advice, be proactive by downloading the application materials and set-up a meeting with a faculty member to discuss your application. Ensure that your application is complete by ensuring that all documents are included and double check for typos, grammar and such.

I am here to help, so please feel free to contact me regarding this opportunity at jcc5@uw.edu.  Answers to Frequently Asked Questions may be found at the provided link above.

* * * * * * * * * * * * * * *

J.Carlos Chavez

Student Program Coordinator and Advisor

Washington NASA Space Grant

WOOF in Winter Quarter

Hey Fabbers,

For now the workshop open days will continue on Fridays.
Where: ME 252
When: Every Friday Noon - 5pm

Winter Quarter General Meeting
Where: ME 252
When: Thurs 17 @ 3:30pm
What's covered:

• New Officers - open call for officers for next school year
• Grawmet Winter Build
• Project: Big Red and the Seafair Boat

Jan 4 Open WOOF Room

Happy New Year!

The first Open WOOF room of the year will be held:
Friday Jan 4
from 12:00 - 5:00pm 
in ME 252

Come in for help, fun, and companionship!
Beth

WOOFer Talks 3D Printing on WGWX Kid's Brain

Our very own Quinn was interviewed last week on WGWX's radio show Kid's Brain talking about her experiences building her Grawmet with us.

Check it out at:
http://wgxc.org/archives/5651

Good job Quinn!
Bethany